Tech Rider

This is a general guide only for live expanded cinema performance sets

SET UP TIME & PARAMETERS
1 hour projector service time when using borrowed projectors
2 hours unassisted set up time for preparing equipment and devices
1 hour sound and vision check
Suitable Space: Needs to be very dark and have no fixed seating. Suits a gallery or dark theatre space without stage and without fixed seating, and where the audience can move around my equipment set up. I generally set up in the middle of the room, closer to the screen than the back of the room. Distance from projectors to screen needs to be minimum 10m.
Example Floor Plan of set up

VISION
2 × 16mm Eiki/Elf NT film projectors (zoom lenses supplied by the artist). Must be NT model or SL model with good capability to thread loops live.

SOUND
1 × 16 channel sound mixer – must have parametric mids in EQ / must have 12 channels each with gain
PA with good frequency range plus bass
14 × 1/4 inch sound leads (approx. 2m in length)
1 x vocal microphone & stand , XLR to ¼ inch lead

MISCELLANEOUS
2 x mic stands (for film loops, no mic or mic clip needed)
1 x trestle table to fit approx. 180cm L x 60cm W x 115cm H
1 riser to raise height of table of necessary
Multi power packs to fit 8 items & power extension cables
2 x international adaptors
Gaffer tape

POWER SUPPLY
For countries on 110V mains, power conversion will need to be supplied for 4 standard electrical items (motor, strobe light, effects units).

Rough Floor Plan for BREACHING TRANSMISSIONS